Mereset Printer Canon MP160 dan MP145

Saturday, March 6, 2010

Matikan printer (kabel power masih tercolok), dalam keadaan printer mati tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF sambil melepas tombol STOP/RESET.
Tekan dan tahan tombol ON/OFF, kemudian tekan tombol STOP/RESET sebanyak 2X.
Lepaskan kedua tombol, sampai tahap ini printer akan masuk ke SERVICE MODE (muncul angka NOL).
Printer akan melakukan charging, tunggu beberapa saat sampai proses selesai.
Setelah printer selesai charging, tekan tombol STOP/RESET sebanyak 4x, dengan indikasi setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye.
Tekan tombol ON/OFF 1X, angka berubah ke SATU (1).
Matikan printer dan cabut kabel POWER.
Tunggu beberapa saat sampai printer benar benar sudah dalam posisi off.
Hidupkan kembali printer, selesai.

Kode Error Canon MP160 dan MP145

E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

Semoga bermanfaat..Amiin